The 5-point harness of a forward-facing car seat provides the best protection for pre-schoolers because it not only restricts movement, ensuring that toddlers are in the proper position should a crash occur, but also distributes the crash forces over a larger area of the body when compared to a safety belt and booster seat (two chest straps with the safety seat’s 5-point harness versus one chest strap with the safety belt.). While many booster seats say that they can be used for children weighing as little as 30 pounds, it is best to wait until the child is at least 40 pounds (and has met the other minimums stated above) before using a booster seat. All children whose weight or height exceeds the forward-facing limit for their car safety seat should use a belt-positioning booster seat until the vehicle seat belt fits properly, typically when they have reached 4 feet 9 inches in height and are 8 to 12 years of age. Children who have outgrown the rear-facing weight or height limit for their convertible seat should use a forward-facing seat with a harness for as long as possible, up to the highest weight or height allowed by their car safety seat manufacturer. Backless booster seats are belt-positioning so that they won’t use the LATCH system and they depend on the child’s weight and the seatbelt to keep the seat on the car’s seat. Up-to-date pricing and reviews for Convertible Booster Car Seats on the market can be found at the convertible car seat adviser website.
Children can graduate from a rear-facing car seat to this forward-facing booster seat with a harness when they are 22 lbs., and it will fit them until they are 50 lbs. These days, safety experts recommend keeping children facing backwards for longer, and the affordable Graco Extend2Fit has a 50-pound weight limit for the rear-facing position (many comparable car seats go up to 40 pounds). While booster seats absolutely offer better protection to children than a standard vehicle seatbelt alone, a harnessed car seat provides a much higher level of protection in a crash.
But across the country, the following is true: Children should be moved to a booster seat only when they have outgrown the height or weight limit of their forward-facing car seat with a harness,” according to the National Highway Traffic Safety Administration (NHTSA). (Infant, convertible, and forward-facing five-point harness seats require a child to weigh under 40 pounds to use the LATCH restraint, otherwise the car seat should be secured using a seat belt). All infant, convertible, and forward-facing five-point harness car seats manufactured after Sept 1, 2002 , include the LATCH option; but for booster seats, LATCH is optional, and the usual weight limit of 40 pounds does not apply.
Parents often look forward to transitioning from one stage or milestone to the next,” the American Academy of Pediatrics wrote in an August 2018 press release on car seat safety, emphasizing that car seats are one area where delaying transitions is the better thing to be celebrated: Each transition—from rear-facing to forward-facing, from forward-facing to booster seat, and from booster seat to seat belt alone—reduces the protection to the child.” High-back booster seats come with adjustable harnesses to fit comfortably across your child’s shoulders and the straps are connected to keep your kid safe using a push button latch system similar to most standard car seat belts. According to some CPSTs, backless booster seats can safely be used as long as you can get a good belt fit, the top of your child’s ears reach the top of the vehicle seat back, and your child is mature enough to sit up straight in the booster seat.
Booster seats are for children who have outgrown their forward-facing harnessed convertible car seat. Designed to meet a child’s needs from birth to somewhere between 40 and 80 pounds and up to 50 inches in height, depending on the seat, they are placed rear-facing (facing the back of the car) at first and later can be turned to face forward (forward-facing) with a harness. However, most backless seats do not attach to a car’s backseat with the LATCH system, and it depends on the seat belt and the child’s weight to keep them safely in place.
After that you can change the combination car seat into the best booster seats by getting rid of the harness straps and shifting to belt positioning mode where you will use the vehicle seat belts until the child is between 80 and 100 pounds(36 to 46 kg). If your vehicle seat has a head restraint where your child will be sitting, you may use a backless belt-positioning booster which will offer them the safety of a correctly fit safety belt without the perception of riding in a car seat, since it will not be seen from the outside. Convertible car seats can be used rear-facing and then switched to forward-facing when your child reaches the appropriate height and weight.
The American Academy of Pediatrics advises that when children exceed the limits of a forward-facing car seat, they should use a belt-positioning booster seat until the vehicle’s lap and shoulder seat belt fits properly. Comfortably seats rear-facing children from 2.3-22.7 kg (5-50 lbs), forward-facing children from 10 – 29.5 kg (22 – 65 lbs) and up to 144 cm (57″) in a 5-point harness, then converts to a booster for children between 23 and 54 kg (50 – 120 lbs) Depending on the height of your child and where the vehicle’s shoulder belt hits your child’s shoulder, you will need to use the belt-positioning booster (with the highback on it), or for taller kids (over about 45″ tall) you can use the backless boosters because the vehicle’s seat belt will hit the child’s shoulder in the appropriate way.
The combination booster car seat is a bit different, as it includes the 5-point harness for smaller children and then transitions to a belt-positioning booster (using the vehicle’s safety belts). At just 19 inches (48 cm) in width, Safety 1st’s Grow and Go convertible car seat is a slim car seat which allows children to ride rear-facing, forward-facing, or using the seat as a high-back booster. Drawbacks: Large gap between harness slots 3 and 4; deep sides make loading and unloading rear-facing child cumbersome; recline feature is unusual and not compatible with pool noodles if you need to increase the recline angle when rear-facing; no lockoffs for seatbelt installation but you can use LATCH up to 50 lbs; moving LATCH belt from RF beltpath to FF beltpath is challenging; SureRide comes out of the box with the LATCH strap routed in forward-facing beltpath which means parents will have to make this adjustment before they can install the seat in the rear-facing position.
Once children exceed the height or weight requirement for forward-facing car seats, they can use a booster seat. There are also 3-in-1 car seats that can first be used as a rear-facing baby car seat, then as a forward-facing seat, then finally as a booster seat when the child reaches the recommended height and weight. A child safety seat, sometimes called a infant safety seat, child restraint system, child seat, baby seat, car seat , or a booster seat, is a seat designed specifically to protect children from injury or death during vehicle collisions Most commonly these seats are purchased and installed by car owners, but car manufacturers may integrate them directly into their vehicle’s design and generally are required to provide anchors and ensure seat belt compatibility.
When your child outgrows the weight or height limit of a forward-facing seat’s harness, it’s time for a booster that uses a car’s own seat belt. Children should remain in their current car seat stage, whether it’s a rear-facing, forward-facing or booster seat, until they reach its weight and height limits. • Backless booster seat age requirements: From the time kids surpass the weight or height limits allowed by their car seat to about 8 to 12 years of age (depending on the child’s size).
Also worth noting: Booster seat crash testing is important, but unlike with convertible or infant car seats, which provide extra protection with a five-point harness, a child riding in a booster depends on the car’s seat belt for protection. Thanks to advances in car seat safety technologies, 4-year-olds that might have been moved into a booster 10 years ago can still safely ride in a rear-facing car seat Even fairly tall children can remain rear-facing through toddler years and then switch to a forward-facing harness until kindergarten age. Another type of convertible seat known as a 3-in-1 or all-in-one car seat can change from rear-facing to forward-facing, then into a booster seat for children up to 100 pounds.
They are useful for when a vehicle has lap-only seat belts in the rear, for children with certain special needs, or for children whose weight has exceeded that allowed by car safety seats. Any child who has outgrown the rear-facing weight or height limit for her convertible seat should use a forward- facing seat with a harness for as long as possible, up to the highest weight or height allowed by her car safety seat manufacturer. Car safety seats may be installed with either the vehicle’s seat belt or its LATCH (lower anchors and tethers for children) system.
When ready and after your child gets too big for the weight or height limits of the forward-facing car seat, put your child in a booster seat used with the vehicle lap and shoulder seat belt. Children who have outgrown the rear-facing weight or height limit for their car seat should move to a forward-facing car seat with a 5-point harness and top tether. In general it’s best hold off on using a booster seat and keep your child in a forward-facing, convertible car seat for as long as possible – as long as the child is still within the car seat’s height and weight limits and fits correctly.
It functions as both a harnessed forward-facing seat for kids 25 – 90 pounds and up to 58 inches in height and as a booster for children 40 to 120 pounds and up to 62 inches in height. Because of the five-point harness featured by our top booster car seat, the Britax – Grow With You , the weight and height range are increased so that children can use this seat at an earlier age. Just once more for emphasis: If your child has not exceeded their convertible car seat’s forward-facing height and weight limits, you should not start using a booster seat.
Not only are convertible car seats safer since they have a five-point harness, but most children aren’t mature enough to sit correctly while unrestrained in a booster seat until they are at least five years of age (and sometimes even older). Once your child exceeds the height and weight limit of his infant car seat, purchase a convertible car seat with a higher height or weight limit (most go to 35 pounds rear-facing) and continue to use it rear-facing until age two, or until your child hits the height or weight limit for rear-facing use. At 14 months, she is way too young for a booster-it’s recommended that children be rear-facing until age 2 OR reaches the height/weight limit of the car seat.
The forward-facing Booster modes without harness (highback or backless) fit children from 30-110 pounds (13.6-50 kg) and 34-57 inches (86.4-144.8 cm) WITHOUT harness (Booster mode). While designing a car or the narrowest booster seat on the market, both manufacturers take all factors into consideration such as the number of car seats that would be required by a user, as well as the safety and security of the children who are travelling in the vehicle. The Diono Radian is a narrowest convertible car seat in 2020, and it can be used as narrowest harness booster car seat for children weighs up to 120 pounds.
Most states require that children under a certain height and weight are in booster seats when riding in a vehicle. Booster seats are pre-crash positioners” that help raise your child up to position the lap portion of the safety belt across your child’s hips/upper thighs and the shoulder belt low across your child’s chest and collarbone allowing for proper protection. Your child is ready for a booster seat when they have outgrown the weight or height limit of their forward-facing harnesses, which is typically between 40 and 65 pounds.
For many car seats, you have two choices when installing your car seat – Lower Anchors and Tethers for Children (LATCH) or using the vehicle’s seat belt with the tether whenever possible. Booster seats are designed to raise children to a height where they can safely wear the vehicle’s built-in seat belt. That’s great news for parents of multiples or children of different ages — you should be able to fit more than one of these convertible car seats across most backseats.
For families with three or more children or families that prefer a smaller vehicle, narrow car seats and narrow booster seats are essential to fit everyone in the vehicle. All kids who have outgrown the rear-facing height or weight limit for their car seat should use a forward-facing car seat with a full harness for as long as possible. Child Weight and Height: The U.S. federal government recommends booster car seats from as early as 4 years old (and a minimum of 40 lbs) to as late as 12 years old.
Without the booster car seat, the child’s lap and shoulders will be too low and the seat belt will not fit properly, posing a substantial safety risk. The seat can be used rear-facing for infants weighing between 5-40 lbs (2.27-18 kg) or up to 40 inches (101 cm) tall, as a forward-facing car seat for children weighing 22-65 lbs (9.98-29.5 kg), and as a booster for children weighing between 40-100 lbs (18-45 kg). Rear-facing weight limit gives parents the option to keep their kids rear-facing longer but the top harness slots aren’t especially tall (16″) so it will be outgrown by height in the forward-facing position long before the 65 lbs. Be sure to visit convertible car seat adviser for the best Convertible Booster Car Seats on the market to buy.
Easy to install in most vehicles but discontinue installation with lower LATCH connectors and use seatbelt (plus tether if forward-facing) to install if child weighs more than 45 lbs. Drawbacks: Lacks a built-in lockoff for seatbelt installations; seat takes up more space rear-facing when the legrest panel is extended; can be difficult to get the last bit of slack out of the harness when tightening – especially on a smaller baby; moving LATCH belt from RF beltpath to FF beltpath is challenging because the cover is difficult to detach at the bottom; recline position #4 is required when the seat is installed forward-facing for a child weighing less than 40 lbs. Easy to install in many vehicles but discontinue forward-facing installation with lower LATCH connectors and use seatbelt plus tether to install if child weighs more than 42 lbs.